> 19” rack mount panel that incorporates a lock out control for tractor panel power

> 19” rack mount panel that controls all Ballistic Delivery System tools
> Incorporates safety key and software dropout functions
> Automatically controls current and voltage levels depending on the tool being used
> Automatically calibrates to the cable
> Records all operations and commands for post job review

> Highly portable control panel for addressable release tool (ART)

> Running tools in deviated or horizontal wells where high tensions are probable and it may not be possible to break the mechanical weak point.
> For use in wells where there is a risk that the toolstring could get stuck
> Below a tractor to give the best chance possible of retrieving the tractor should the passenger toolstring become stuck.

> Can be deployed when tractoring to monitor forces above and/or below the tractor.
> Allows critical decisions on which ART to release when a toolstring is stuck to be made with confidence.
> Suitable for perforating operations.
> Validates tension models.
> Desirable in Pump Down operations giving better understanding of the forces being applied to the Toolstring.

> Available in various head types including Baker Hughes, Schlumberger and Weatherford with 10 or 15 feedthrough.
> Available in multiple diameters with various head types.
> Will work on 40k ft of multi conductor cable.
> Incorporates 3 different safety systems including full digital telemetry and minimum well pressure requirement
> Eliminates reliance on mechanical weak point and ensures a clear fish.

> Designed to comply with API RP 67 section 6
> Electrically and mechanically isolates the detonator from the line
> Can switch between 2 lines in a tool string

> Isolates shorts in the line after perforating
> Ensures tools can still be operated after firing gun

> Can be used as a ‘Tractor Handbrake’ to allow tractoring in deviations greater than 90 degrees.
> Can operate in a wide range of diameters
> Prevents rotation of lower tools
> Shear pin release for emergency situations

> High torque motor can orientate to any angle in the well bore
> Accuracy of ± 2 degrees

> Addressable system allowing unlimited set and unset operations
> Stops gun being blown up hole after perforating

> Cushions impact from perforating gun and protects string

> Electrical and mechanical cross over engineered for minimal length.
> High pressure and temperature ratings.
> NACE specification (MRO175) materials used for wells containing H2S/CO2.

> Provides the mechanical and electrical connection between the wireline cable and logging tools.
> The weakpoint value can be customised by varying the number of armour wires used.